Sunday, April 17, 2016

Why pin when you can screw?

Doing some slow construction work on my Warlord. With the amount of weight and pressure that's going to rest on the lower joints I wanted to use a different method to secure the joints. Pins just didn't seem enough. So I used a screw.

I drilled a guide hole and used a routing bit to counter sink the screw. Once the screw was in place I used some JB Wield to fill.

I had to admit that was the most nerve wracking method I've ever used but the screw will provide a more secure join.

Got my inspiration from

blog comments powered by Disqus